409-Industrial Control Panels
Table 409.3 Other Articles
I. General
Equipment/Occupancy Article
Branch circuits 210
Luminaires 410
Motors, motor circuits, and 430
controllers
Air-conditioning and 440
refrigerating equipment
Section
Table 409.3 Other Articles
Equipment/Occupancy Article
Branch circuits 210
Luminaires 410
Motors, motor circuits, and 430
controllers
Air-conditioning and 440
refrigerating equipment
Section
380.1 Scope. This article covers the use and installation requirements for multioutlet assemblies.
380.2 Use.
(A) Permitted. The use of a multioutlet assembly shall be permitted in dry locations.
(B) Not Permitted. A multioutlet assembly shall not be installed as follows:
410.1 Scope. This article covers luminaires, portable
construction specifications for rigid polyvinyl chloride con
duit (PVC) and associated fittings.
FPN: Refer to Article 353 for High Density Polyethylene Conduit: Type HDPE, and Article 355 for Reinforced Thermosetting Resin Conduit: Type RTRC.
382.1 Scope. This article covers the use, installation, and construction specifications for nonmetallic extensions.
382.2 Definitions.
I. General
FPN: Refer to Article 352 for Rigid Polyvinyl Chloride Conduit: Type PVC and Article 355 for Reinforced Ther- mosetting Resin Conduit: Type RTRC.
384.22 Number of Conductors. The number of conduc- tors permitted in strut-type channel raceways shall not exceed the percentage fill using Table 384.22 and applicable cross-sectional area of specific types and sizes of wire given in the tables in Chapter 9.
The derating factors of 310.15(B)(2)(a) shall not apply to conductors installed in strut-type channel
354.1 Scope. This article covers the use, installation, and construction specifications for nonmetallic underground conduit with conductors (NUCC).
354.2 Definition.
of conductors or cables installed in surface metal raceway shall not be greater than the number for which the raceway is designed. Cables shall be permitted to be installed where such use is not prohibited by the respective cable articles.
The derating factors of 310.15(B)(2)(a) shall not
apply to conductors installed in surface metal raceways
where all of the following conditions are met:
(1) The cross-sectional area of the raceway exceeds