Heating A/C
You are here
How to Vent Thermal Trombe Walls
Thermal walls, or Trombe walls, are the single most flexible passive solar option: they work in any climate and on any home, providing extra heat throughout the night after gathering heat during the day.
How to Use Thermal Trombe Walls Properly
As with all passive solar design options, Trombe walls are a great addition to your home design: they retain a lot of heat, helping to reduce your nighttime heating costs throughout the cool period of the year. However, again like all other options, they need to be used correctly or they won't do you any good.
How to Choose the Right Thermal Wall Design
Although thermal Trombe walls work well in all climates and for almost any home, you need to choose the correct design for your particular needs. This choice depends on your local climate. Here are some essential guidelines:
Pros and Cons of Trombe Thermal Walls
The single most widely applicable passive solar design option is thermal or Trombe walls. The option works in every climate and every location, from the hottest and sunniest to the coldest and darkest. But like everything, Trombe walls have their disadvantages as well.
Pros and Cons of Sunspaces
Sunspaces – especially those attached outside the main home – are extremely popular. However, like all things, you need to carefully consider the benefits and disadvantages rather than just jumping in and building one.
Backup Heating for Passive Solar Homes
Almost every passive solar building has a backup heating system, whether it's really needed or not. It is possible to design a passive solar home that heats itself, but it may not pass local building regulations. It will also be very hard to sell, as most home buyers simply won't believe that the house needs no heater other than the sun!
There are five options commonly available as backup heating for passive solar homes:
Forced-Air Backup Heating Systems Pros and Cons
It is one of life's cruel ironies that the most common heating system in the USA is also one of the least environmentally friendly. Forced-air heating installations are present in over 60% of homes in the country. Of course, some are better than others – these systems have heat generated by solar thermal systems, heat pumps, and furnaces of all types (oil-fired, gas-fired, electric, or wood).
How to Prepare Pex Tubes for Radiant Heating
Back when modern radiant floor systems were first installed, copper or steel pipes were used. They were embedded in concrete under the floor and hot water ran through them to heat the building. It doesn't take a genius to see where the problems came from:
How to Calculate Pex Length for Radiant Heating
There is an upper limit on how much Pex tubing you can use in a radiant heating installation. If the circuit is too long, the solar fluid will cool off before it reaches the end and you will get uneven heating. For standard-sized Pex tubes (half-inch or 5/8-inch internal diameter), the circuit length should not exceed 300 feet – which is conveniently the size of the coil supplied by many manufacturers.